bestbuildpc: Forums
 

 Forum FAQForum FAQ   SearchSearch   UsergroupsUsergroups   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Golf 7 Torque Specifications
 
 
Post new topic   Reply to topic    bestbuildpc Forum Index -> Golf 7 MK7 1.2L TSI CJZA
View previous topic :: View next topic  
Author Message
bestbuildpc
Site Admin
Site Admin


Joined: Jun 30, 2012
Posts: 180
Location: NL

PostPosted: Tue Sep 20, 2022 2:24    Post subject: Golf 7 Torque Specifications Reply with quote

After every brake pad change, depress brake pedal firmly several times with vehicle stationary, so that brake pads are properly seated in their normal operating position.
Use the brake filling and bleeding equipment to draw off brake fluid from the brake fluid reservoir.
Before removing a brake caliper or disconnecting a brake hose, fit brake pedal depressor (when doing this, release pressure in system).


Image

1 - Splash plate
2 - Torx bolt 12 Nm
3 - Brake disc
Internally ventilated
Wear limits → Chapter
Always renew on both sides of an axle.
Remove brake caliper and brake carrier prior to removing.
4 - Torx bolt 4.5 Nm
5 - Brake carrier Apply thin coat of lithium grease G 052150 A2 to brake pad guide surfaces.
6 - Brake pads
Thickness: 14 mm not including backplate.
With front right brake pad wear indicator
When wear reaches a predetermined limit (approx. 4 mm), the warning lamp in the dash panel insert comes on. Sensors can be renewed individually.
Wear limit: 2 mm not including backplate.
Checking thickness → Booklet.
Always renew on both sides of an axle.
Removing and installing → Chapter
7 - Trim with badge
Allocation → Electronic Parts Catalogue (ETKA).
8 - Brake caliper
Do not disconnect brake hose when changing pads.
Removing and installing → Chapter
Repairing → Chapter.
Allocation → Electronic Parts Catalogue (ETKA).
9 - Hexagon bolt (self-locking) Renew after removing 35 Nm
10 - Ribbed collar bolt Clean if reused. 200 Nm
11 - Wheel bearing housing With bolted brake carrier.
Allocation → Electronic Parts Catalogue (ETKA).
12 - Brake hose with banjo union and banjo bolt
Ensure correct installation position 35 Nm
13 - Retaining clip
14 - Bracket
15 - Bolt 8 Nm
  
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:       
Post new topic   Reply to topic    bestbuildpc Forum Index -> Golf 7 MK7 1.2L TSI CJZA All times are GMT + 2 Hours
 
 Page 1 of 1

 

Jump to:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Powered by phpBB © 2001-2008 phpBB Group
 
Forums ©